PureMate PM 1550 Instruction Manual

PureMate PM 1550 Instruction Manual

Ceramic tower heater
Hide thumbs Also See for PM 1550:

Advertisement

CERAMIC TOWER HEATER
Model No: PM 1550
INSTRUCTION MANUAL
IMPORTANT
Do Not Use This Tower Fan Until You Have Read This Entire Manual Thoroughly
and keep it save place for future reference.
This product is only suitable for well insulated spaces or occasional use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PM 1550 and is the answer not in the manual?

Questions and answers

Summary of Contents for PureMate PM 1550

  • Page 1 CERAMIC TOWER HEATER Model No: PM 1550 INSTRUCTION MANUAL IMPORTANT Do Not Use This Tower Fan Until You Have Read This Entire Manual Thoroughly and keep it save place for future reference. This product is only suitable for well insulated spaces or occasional use.
  • Page 2: Safety Precaution

    Thank you for purchasing the innovative PureMate Tower Heater. We wish you many years of healthy indoor air with this efficient and effective product. SAFETY PRECAUTION CAUTION: To avoid the risk of electrical shock, fire or injury to people, always ensure the heater has been disconnected from the electrical outlet before moving, servicing, or cleaning it.
  • Page 3: Safety Features

    SAFETY FEATURES - In the event of abnormal overheating, a safety device shuts down the appliance automatically. After a short cooling down phase, the appliance is ready for use again. - If you still notice the same defect as above mentioned, remove the plug from the socket and customer service.
  • Page 4: Control Panel & Remote Control

    CONTROL PANEL & REMOTE CONTROL ON/OFF MODE TIMER DOWN OSCAL Oscillation Temperature Power Timer Increase Button Heat Temperature Mode Decrease OPERATING INSTRUCTIONS Plug the unit in and turn on the main power switch at the back of the unit. Press the Standby button to turn on the unit, this will enter Fan Mode. Press again to turn off.
  • Page 5: Remote Control

    REMOTE CONTROL - The remote control requires 1 CR2025 3V lithium battery (not included) - Important: Follow the instructions of use and the recycle rules given on the battery packaging. - Open the battery compartment by sliding the cover down. - Insert the battery into the compartment, observing the polarity in the diagram (see below drawing).
  • Page 6 Information requirement for the electric local space heater Model identifier(s): PM 1550 Item Symbol Value Unit Item Unit Type of heat input, for electric storage Heat output local space heaters only (select one) manual heat charge control, Nominal heat output...

Table of Contents