Subscribe to Our Youtube Channel
Related Manuals for PureMate PM 807
Summary of Contents for PureMate PM 807
- Page 1 700W Oil Filled Radiator Model NO: PM 807 INSTRUCTION MANUAL This Product is only suitable for well insulated spaces or occasional use.
-
Page 2: Safety Instruction
Thank you for purchasing the innovative product the PureMate 700W Oil Filled Radiator. We wish you many years of warmth with this efficient and effective product. SAFETY INSTRUCTION PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. This appliance can be used by children aged from 8 years and... - Page 3 WARNING: In order to avoid overheating, do not cover the heater.The meaning of figure in marking is “DO NOT COVER”. The heater must not be located immediately below a sock- et-outlet. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Page 4 WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1m from the air outlet. Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts inside. CAUTION –...
- Page 5 COMPONENTS 1- Radiator Fins 2- Handle 3- On/Off Power Switch (and Indicator Light) 4- Thermostat Dial 5- Rear Stand...
- Page 6 SAFETY CONTROLS (THERMAL CUT-OFF) This heater is protected with overheat protection that switches off the appliance automatically in case of severe overheating. In this case, unplug the appliance, wait about 30 minutes for it to cool and remove any possible cause of overheating, eg. something covering the heater.
- Page 7 ASSEMBLY Turn the heater upside down on a scratch-free and flat stable surface. (Fig. A). Fit the Rear Stand into the last fin with screw hole facing out- ward and press it down. Secure the Rear Stand with the two accompanying screws.
- Page 8 OPERATING INSTRUCTIONS Place the heater upright on a flat, steady and heat-resist- ant surface. Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is '0' OFF. Insert the plug into a suitable socket. Turn on the heater by using the ON/OFF switch. Turn the thermostat dial clockwise until you hear a click and the light turns on.
-
Page 9: Cleaning Tips
CLEANING TIPS Clean the exterior surface of the heater by wiping it with a soft, damp cloth. Store the heater in a clean, dry place when it is not in use. Caution: Allow the heater to completely cool before handling or cleaning it. -
Page 10: Specification
SPECIFICATION PM 807 Model : Rated Voltage : 220-240V~ 50Hz Power Consumption: 700W Dimensions (L x W x H): 32(L)x 13(W) x 37.5(H) CM Net Weight: 3.6 kg DISPOSAL OF THIS DEVICE At the end of the product life cycle, you should not throw... - Page 11 Model identifier(s): PM 807 Value Unit Item Symbol Item Unit Type of heat input, for electric storage local space heater Heat output heaters only (select one) Manual heat charge control, with integrated Nominal heat output Pnom thermostat Manual heat charge control with room and/or...
- Page 12 Model NO: PM 807 700W Oil Filled Radiator Super Tech Health Limited 129 Shady Lane Great Barr Birmingham West Midlands B44 9ER United Kingdom WWW.PUREMATE.CO.UK Copyright 2023...
Need help?
Do you have a question about the PM 807 and is the answer not in the manual?
Questions and answers