Operating Instructions; Starting Your Washer - Whirlpool LA528OXT Use And Care Manual

Operating Instructions
The drawings in this book may vary slightly from your washer model. They are
designed to show the different features of all the models covered by this book.
NOTE:
Your model may not include all the features shown.
Starting your washer
Be sure to measure and add detergent, then place a sorted load in the washer before
starting it.
iA5500X~)
(models LA5510XT, LA5610XT and
LA601 0X1)
1. Select a load size
For models LA5200XT LA5280XT
and LA55OOXT
l
Turn the knob to point at a setting that
describes the size of load you want
to wash.
l
Set the knob on EX SMALL (a few
small items), MEDIUM or LARGE
(a full load).
For models LA5510XT LA561OXT and
LA601 OXT
l
Turn the knob to point at a setting that
describes the size of load you want
to wash.
l
Set the knob on SMALL (a few small
items) or LARGE (a full load).
NOTE:
For best washing results, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too low for your
wash load.
For best results with permanent
press clothes, use the LARGE
water level.
Reduce wash time when using
SMALL water level settings. Loads with
only a few small items need less wash
time for best results.
2. Select water temperature
l
Match the water temperature to the
type of fabric and soils being washed.
l
The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE:
Use warm wash water with
the PERMANENT PRESS or KNITS/
GENTLE Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or presoak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.