Glasdon SHERWOOD Operator Instruction Leaflet

SHERWOOD
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE

To Remove and Replace Hood (Sack Retention or Solid Liner Model)

1.
Insert key into keyhole,
located at the side of the
bin
4.
When replacing the hood,
ensure the fixtures are
aligned with the apertures
on the bin, as shown
7.
Pull the sack up from
within the bin, and wrap
over the sack bands
Operator Instruction Leaflet
2.
With the key held in
place, twist the Hood
anti-clockwise
5.
When hood is seated, twist
clockwise to lock back into
8.
Push the sack bands
back down to secure the
LITTER BIN
TM
position
9 .
sack
1
3.
Once twisted, lift the
hood upwards to remove
To Secure a Sack in Position
(Sack Retention Model)
6.
Pull the sack bands
upwards
To Remove and Replace
Solid Liner
Use the handles on the Liner
rim to lift the Liner from, or
lower it back into, the bin