Thank you for your purchase Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information Safety Information SET UP YOUR FURNITURE PROPERLY SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per instructions. When placing in the desired location, ensure that all legs are resting on the same surface.
Warranty Warranty Cushions are covered for a period of one (1) year against defects in material or workmanship. Frames are warranted to be free from defects in material or workmanship for a period of one (1) year. Exclusions: Items used for commercial, contract, or other non- residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly is not covered.
Pre-Assembly Pre-Assembly PLANNING ASSEMBLY PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly. It takes about 90 minutes for two people to complete all the assembly. OBSERVE WEIGHT LIMITS OBSERVE WEIGHT LIMITS The recommended weight limits for the following products are listed below: Chair: 250 lbs...
Pre-Assembly(continued) Pre-Assembly(continued) Package Contents Package Contents QUANTITY QUANTITY PART PART DESCRIPTION DESCRIPTION THE SEAT OF CHAIR THE BACK OF CHAIR Safety Information Safety Information 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 2.
Assembly Instructions Assembly Instructions Attaching the seat to the back Attaching the seat to the back INSERT TWO PINS ON SEAT “A” IN TO HOLES ON BACK “B”,FASTEN WITH LOCKING NUT “AA” HALF THE WAY USING WRENCH DD . FIXED BOLTS ON INNER SIDES OF "B" GOING THROUGH THE BRACKET HOLES ON "A". TIGHTEN WITH BOLTS "MM"...
Page 8
Assembly Instructions Assembly Instructions Adding the caps Adding the caps CHECK AND MAKE ADJUSTMENT AS NEEDED, FULLY TIGHTEN THE NUTS “AA” WITH WRENCH “DD” AND BOLTS WITH ALLEN WRENCH “JJ”. COVER THE NUTS WITH CAPS “CC” AND THE BOLTS WITH CAPS “NN”...
Pre-Assembly(continued) Pre-Assembly(continued) Package Contents Package Contents QUANTITY QUANTITY PART PART DESCRIPTION DESCRIPTION THE SEAT OF LOVESEAT THE BACK OF LOVESEAT Safety Information Safety Information 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 2.
Page 10
Assembly Instructions Assembly Instructions Attaching the seat to the back Attaching the seat to the back INSERT TWO PINS ON SEAT “A” IN TO HOLES ON BACK “B”,FASTEN WITH LOCKING NUT “AA” HALF THE WAY USING WRENCH DD . FIXED BOLTS ON INNER SIDES OF "B" GOING THROUGH THE BRACKET HOLES ON "A". TIGHTEN WITH BOLT "MM"...
Page 11
Assembly Instructions Assembly Instructions Adding the caps Adding the caps CHECK AND MAKE ADJUSTMENT AS NEEDED, FULLY TIGHTEN THE NUTS “AA” WITH WRENCH “DD” AND BOLTS WITH ALLEN WRENCH “JJ”. COVER THE NUTS WITH CAPS “CC” AND THE BOLTS WITH CAPS “NN”...
Page 12
Pre-Assembly(continued) Pre-Assembly(continued) Package Contents Package Contents QUANTITY QUANTITY PART PART DESCRIPTION DESCRIPTION TABLE TOP LEGS LOWER SHELF Safety Information Safety Information 1.REMOVE THE PLASTIC PROTECTIVE CAPS BEFORE ASSEMBLY. 1.REMOVE THE PLASTIC PROTECTIVE CAPS BEFORE ASSEMBLY. 2. YOU MAY NEED TO MAKE ADJUSTMENTS TO THE FOUR LEGS ENSURE THAT 2.
Assembly Instructions Assembly Instructions Attaching the leg to the top Attaching the leg to the top PUT THE LEGS “B” METAL SIDE INTO THE FOUR HOLES OF TOP “A”. ATTENTION: THE LEGS "B” MUST BE PUT AS ILLUSTRATED. FASTEN WITH BOLTS “II” AND TIGHTEN.
Page 14
Assembly Instructions Assembly Instructions Attaching the shelf Attaching the shelf FIX THE BOLTS ON THE SHELF “C” AND USE LOCKING NUTS “AA” TIGHTEN IT BY HAND.
Page 15
Assembly Instructions Assembly Instructions Adding the caps Adding the caps CHECK AND MAKE ADJUSTMENT AS NEEDED, FULLY TIGHTEN THE NUTS “AA” WITH WRENCH “DD” AND BOLTS WITH ALLEN WRENCH “JJ”. COVER THE NUTS WITH CAPS “CC”.
Need help?
Do you have a question about the DURHAM D71 M34646 and is the answer not in the manual?
Questions and answers