Video Settings; Time Per Photo Slide; Video Signal Setting - Pioneer DMH-Z5350BT Operation Manual

NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Touch .
2
Touch then
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch or
5
Drag the graph line to set the cutoff position.
6
Drag the lowest point of the graph to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass
LPF/HPF
filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.

Video settings

The menu items vary according to the source.

[Time Per Photo Slide]

Menu Item
[Time Per Photo Slide]
[5sec] [10sec] [15sec]
[Manual]

[Video Signal Setting]

Menu Item
[AV]
[Auto] [PAL] [NTSC] [PAL-
M] [PAL-N] [SECAM]
[AUX]
[Auto] [PAL] [NTSC] [PAL-
M] [PAL-N] [SECAM]
[Camera]
[Auto] [PAL] [NTSC] [PAL-
M] [PAL-N] [SECAM]
.
to switch the speaker.
Description
Select the interval of image file slideshows on this product.
Description
Select the suitable video signal setting when you connect
this product to an AV equipment.
Select the suitable video signal setting when you connect
this product to an AUX equipment.
Select the suitable video signal setting when you connect
this product to a rear view camera.
- 76 -