CamDo UNDERWATER WIFI INSPECTION PACK Setup Instructions page 7

LumeCube Setup
The LumeCube has 10 manual brightness settings that change in increments of 150 lumens. The
brightest setting maxes out at 1500 lumens. On a full charge at maximum brightness, the LumeCube
will last up to 30 minutes. At 50% brightness, your LumeCube will last 2 hours. Each LumeCube
produces a 60º beam. The dual LumeCube tray provides full light coverage for the GoPro's wide 120º
horizontal field of view.
Left Button
Turns on the constant video light.
●
Click multiple times to cycle through the 10 brightness settings.
●
Hold for five seconds to shut down the cube.
●
Right Button
1 click activates the Bluetooth (for use with LumeCube App - not required).
●
5 second hold activates the optical sensor.
●
1 click turns off the constant video light.
●
LumeCube Button Operation
Page 7 of 10
Rev1.1 | May 2018