Lexing LXF-50W Instruction

LXF-50W Infrared sensor LED floodlights Instruction
Packing list in
LED Floodlight
LEDS 56PCS
Φ6 Plastic expansion
4x30 Screw

Specifications

Power source: 220-240VAC
Power frequency: 50Hz
Rated load:50w Max.
Time setting: 8s-9min (adjustable)
Light-control: <10LUX-＞300LUX(Adjustment)
Detection range: 2-10m Max(24°C)
Detection angle: 120°

Function

Can identify day and night: the light control can be adjusted freely when it works. It can work in the daytime and at
night when it is adjusted on the "sun" position (max); but it can only work in the light control less than 10lux when it is
adjusted on the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.
Time delay can be added continually: when it received the second induction signal after the first it will compute time
once more on the rest of the first time delay basic.(Set time)
It can be defined in the range of 10~>300 LUX. To turn the knob fully clockwise is about 10 lux,fully anti-clockwise is

Summary

Quantity
The product is a High-power cast LED sensor light; it
adopts good sensitivity detector, integrated circuit and
1X
SMT.
saving-energy and practicality functions. The wide
2X
detection field is made up of up and down, left and right
service field. It works by receiving human motion infrared
2X
rays. When one enters the detection field, it can start the
load at once and identify automatically day and night; Its
Installation is very convenient and Its using is very wide.
235mm
It gathers automatism,
Working temperature: -10°C~+40°C
Working humidity: <93%RH
Installation height: 1.8m~2.5m
Standby power：＜0.5W
Luminous flux: 4600lm
IP: 65
137mm
convenience, safety,