Royalcraft Alderley 6 Seat Round Table Dining Set – Table Assembly Instructions page 5

Step Three
Loosely attach the Connecting Panels (B) between Table Legs (A), aligning all holes in each
part, using Washers (F3) and Bolts (F63).
Only tighten the bolts when all bolts and washers are in place. Once you are satisfied with the
alignment of the components carefully tighten all bolts using Spanner (F1).
Do not over-tighten.
Cover each bolt with Bolt Head Cap (F2).
Step Four
With the help of another person, carefully turn the table in the upright position. Level the table
by adjustable feet screw.
Carefully place the Glass Top (D) on the Table Top Frame (C) and make sure they are aligned.
Your table is now ready for use.
Note: This table is not designed to hold the parasol separately.
Parasol base with suitable weight should always be used.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
Alderley 6 Seat Round
Table Dining Set – Table
Assembly Instructions
Adjustable Foot Screw
www.royalcraft.co.uk
5 / 5