Denon AVR-X2200W Service Manual page 91

Can the NET3.3V output voltage (3.3 V)
to Q1071 (FET-SW) be confirmed?
Can the NET1.2V output voltage (1.2 V)
to U1070 (DC-DC Conv.) be confirmed?
Can the NET2.5V output voltage (2.5 V)
to U1072 (DC-DC Conv.) be confirmed?
Can the NET1.8V output voltage (1.8 V)
to U1071 (DC-DC Conv.) be confirmed?
Are the versions of the Ethernet SBL and IMG displayed in Version
Check Mode?
The circuit around CY920 is faulty.
NO
Is E_POWER1 (U1018 uCOM 132 pin)
"Hi" ?
YES
NO
Is E_POWER4 (U1018 uCOM 132 pin)
"Hi" ?
YES
NO
Is E_POWER2 (U1018 uCOM 133 pin)
"Hi" ?
YES
NO
Is E_POWER3 (U1018 uCOM 134 pin)
"Hi" ?
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
The Ethernet software is faulty.
91
The circuit of E_POWER1 between
U1018 and Q1071 are faulty.
The circuit around Q1071 (FET-SW) is
faulty.
The circuit of E_POWER4 between
U1018 and U1070 are faulty.
The circuit around U1070(DC-DC.
Conv.) is faulty.
The circuit of E_POWER2 between
U1018 and U1072 are faulty.
The circuit around U1072 (DC-DC.
Conv.) is faulty.
The circuit of E_POWER3 between
U1018 and U1071 are faulty.
The circuit around U1071 (DC-DC.
Conv.) is faulty.