Shure Sound Isolating Safety Information Manual page 12

2. Select the second device on your audio source.
3. LED turns blue on second device when successfully paired.
Pairing Bluetooth Device to a PC
If you are having difficulty pairing your BT1 earphones to your PC, you may need to update your drivers. Here are
two ways to update your computer driver via the Intel website.
1. Manually: This requires that you locate your wireless adapter and then download the specific driver update for
that wireless adapter. Information and drivers are located here: Manual Update (https://www.intel.com/content/
www/us/en/support/network-and-i-o/wireless-networking/000005489.html).
2. Intel Update Utility: This requires you to download the update app, run the app and allow it to scan your com-
puter for required driver updates. Download the app here: Intel Update Utility (https://www.intel.com/content/
www/us/en/support/detect.html?wapkw=update+utility).
Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to your PC user manual for
more information.
Using the BT1 Remote
The Center Button
Power on
Power off
Bluetooth pair
Play/Pause
Answer/End a call
Decline a call
Activate voice assistant
Erase all paired devices. Factory default settings
®
Press and hold
Press and hold, 5 seconds
Press and hold, 10 seconds
Click once
Click once
Press and hold, 3 seconds
Phone on, press and hold, 3 seconds
Phone off, press and hold past "power on, Bluetooth
pairing mode, battery life" messages to power down.
Shure Incorporated
12/21