Advertisement
large enough, they may become ever so
slightly audible upon the pitch of not just
the 2VL1, but any other VCOs on your
Eurorack as well. The transistor circuit
and 150uF cap on PCB-C help mitigate
these ripples to a great degree, but it's
still best to avoid high-current LEDs as
well ("Belt and suspenders").
Be careful to not scratch the panel while
installing the jack and pot nuts and
washers!
Finally, install the knobs. The picture
below shows the recommended color
layout.
That's it! Please enjoy your new module
and happy music making!!
8
© 2019 Weston Precision Audio
Advertisement
