Table of Contents
Advertisement
Auto defrost function
If the product is used in a place lower than correct temperature range for operation, frost may occur to the product. In this
case, the frost may be removed automatically by the auto defrost function.
f The compressor does not work while the auto defrost function is in operation.
f
f When the compressor is turned on or off, a noise may occur for short time.
f
Continuous dehumidifying function
You can dry the laundry or damp materials continually regardless of ambient humidity.
Press the
(Humidity) button and select continuous dehumidifying function (CO) in auto mode or calm mode .
f Press the
f
button several times to set continuous
dehumidifying function (CO).
f If you press the
f
button during continuous
dehumidifying function, the function is cancelled and the
product operates by newly set humidity.
Water Full warning function
When the water container is filled with water, the product automatically stops operation as the Water Full indicator(
blinks with alarms (8 times).
When the Water Full indicator(
f When the water container is filled with water, all the
f
functions of the product cannot be used. However, If you
press the
(Power) button, the Water Full alarm goes on.
• To empty the water container, refer to p.20.
NOTE
• When the water container is not inserted correctly, the product does not work as the Water Full indicator (
blinks.
• When using the nonstop drain function, the water in the water container drains automatically even though you
don't empty the water container. To install the nonstop drain hose, refer to p.19.
Dehumidifier AY7000H-PJT_IB_EN-TC_DB68-04916A-00.indb 17
) blinks with the alarm, empty the water in the water container .
ENGLISH-17
)
)
2014-11-17 오후 1:32:09
Advertisement
Chapters
Table of Contents
