Whirlpool RT25BK Use And Care Manual page 8

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call us.
(See page 19.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION: REASON:
CONTROL SElTINGS:
If Refrigerator
Door opened often
Section is Large amount of food added
TOO WARM Room temperature too warm
Refrigerator 6
Freezer D
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator
4
Freezer
A
TOO COLD
Controls not set correctly
for your conditions
Refrigerator
Freezer
:
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Refrigerator 4
Freezer
A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer :
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lii back of shelf.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.