Samsung RS25H5A Series User Manual page 28

Installation
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver
To detach the door
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
• If necessary, have two people disassemble the doors.
28 English
Untitled-2 28
Flat-head Socket spanner
screwdriver
1. With the doors closed, use a Phillips
screwdriver to remove the 3 screws in
the top cover.
NOTE
Be careful not to damage the sensor
harness with the top cover.
Allen spanner
(10 mm) (5 mm)
2018-12-27 11:31:22