Delta 50150 Series Manual page 28

Installation
3
Valve Trim Installation
A.
3
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut. Slide the sleeve
(3) over the cartridge, body and O-ring.
Ensure sleeve is properly positioned over
the front of cartridge.
C.
3
2
Install volume control handle (1) with lever
to the right, using an Allen wrench (2) to
secure with the set screw (3).
68883 Rev.F
2
1
1
B.
1
3
4
Escutcheon Installation for
Models T17T053, T17T253, T17T453
T17T067, T17T267 & T17T467.
9
Secure the escutcheon (1) to the bracket
(2) with the 2 screws provided (3). Do not
overtighten escutcheon screws.
If you are installing the Cassidy models
T17T097, T17T297 & T17T497:
Thread the cover (4) onto the escutcheon (1).
For models T17T053, T17T253, T17T453
T17T067, T17T267 & T17T467:
Install bracket (5) over the cartridge body
using the 2 screws provided (6). Install
escutcheon (7) by placing it over the bracket
as shown and rotating it to lock the tabs (8).
Secure the escutcheon to the bracket using
set screw (9).
6
2
6
5
7
8
8