Torbal AD Series Quick Reference Manual

Percent Weighing (Percent)

Percent Weighing is used to compare the relative weight of an unknown item to that of a previously stored sample. An
"E" indicator will appear on the screen to indicate the scale is in Percent Weighing mode.
1. To enter Percent Weighing Mode, press the "F" key. Select "percent" by pressing the "T" key.
2. Place an empty weighing container on the pan. The
container's weight will be displayed. Wait for the weight to
stabilize and press the "T" key to tare.
100.000
------
3. The scale will display the weight of the previously stored sample and the command "SAMMPLE" sequentially. To
accept the current sample weight, press the "T" (Yes) key. To change the sample weight, press the "
100.000
Note: If this is the first time the function is used, the sample weight will be
0.000g.
To change the sample weight, place a new sample in the weighing container
when "SAPL ON" is displayed. Once stabilized, press the "T" (Yes) key to accept
the new weight.
Percent Weighing – Quick Reference Guide – AD Series
PERCENT
SAMMPLE
" key.
0