Summary of Contents for DCS PV Series
- Page 1 DCS PV Series RESU Residential Energy Storage Unit PV 5.0(W) & PV 10.0(W) Battery Packs INSTALLATION MANUAL...
-
Page 2: Battery Management System (Bms)
Introduction: The DCS PV Series packs are designed primarily for efficiently storing photovoltaic energy produced by solar systems. BATTERY MANAGEMENT SYSTEM (BMS): DCS PV 10.0 – Free standing battery design (not suitable for wall mounting) All DCS PV Series battery packs feature an advanced internal BMS. - Page 3 Performance specifications & charging currents: Refer to the label on the side of the battery pack to confirm the model and specifications. DCS PV 5.0 / DCS PV 5.0W Recommended charging current 40Amps when connecting a single PV 5.0 (100Ah) battery to an inverter.
-
Page 4: Installation
Installing the battery packs: mounting to a wall, only 6. Tighten the hex terminal screws to a torque of the DCS PV W series of batteries can be wall mounted. 6Nm and restore the terminal plate covers. The W series batteries have an internal passive thermodynamic architecture that provides superior 7. - Page 5 Warranty Coverage: DCS protects this product under warranty when this product is installed and used as detailed in this manual. Violating the installation procedure or using this product in any way not described in this manual immediately voids all warranties on this product.
- Page 6 The worlds most advanced lithium ion energy storage battery unit Deep Cycle Systems Pty Ltd 46 Main Western Road North Tamborine, QLD 4272 deepcyclesystems.com.au || Tel: 1300 795 327...