Maintenance - Profi-AirBrush Single-Action-Gun 138 D 0,3 Operating Instructions Manual

4 English
6. coMMISSIonIng
6.a Connect the airbrush gun to the pressure hose (illustrations as an example and depending on airbrush model).
6.b Then screw the air hose with airbrush gun to a suitable compressor. (Illustrations as an example and depending on the
compressor model).
6.c Fill the container of the airbrush gun with an appropriately diluted color.
7. cLeanIng and care
l R inse the gun's paint dispensers with water or thinner, depending on the paint used.
l C lean the air nozzle with a brush or a brush. Do not immerse the nozzle in thinner.
l T o clean the nozzles, use only the appropriate cleaning needles. Under no circumstances try to clean clogged
openings with improper objects, since even the slightest damage can cause a change in the spray performance.
Your airbrush gun must be thoroughly cleaned after every color change. the gun should be regularly clea-
ned, depending on the paint used, with a suitable thinner, aerocLean raPId from Schmincke (available
in the profi -airbrush-shop) or water.
Especially the nozzles, which are subject to wear, remain functional by careful cleaning longer.

8. MaIntenance

The maintenance and servicing work must be carried out according to our operating instructions, the corresponding
safety regulations must be observed.
the airbrush has to be cleaned IMMedIateLY after use with suitable solvents and dry with compressed air.
no deposits may form in the gun. In the presence of any external deposits in the airbrush gun and a dama-
ge picture, which can be attributed to it, the claim for legal warranty does not apply.
l Change the nozzle set
Always change the complete nozzle set if you want to change the nozzle size. These parts, consisting of nozzle
and color needle, are supplied as a complete set. Mount the ink nozzle before inserting the color needle.
the following checks should be carried out regularly:
l Clean guide lines (e.g., no bend)
l Check for leaks
9. SafetY InStructIonS
l Keep away from children! It's not a toy!
l T he airbrush gun must not be operated by persons under the infl uence of alcohol, drugs or medication.
l I t is NOT recommended to carry out any technical modifi cations on your own. Firstly, it is not ensured
whether this modifi cation is technically fl awless, in addition, the guarantee claim is forfeited.
l Observe the ambient temperature between +5 and + 40 ° C
l Never pull the hose
l N ever expose the appliance to dust, acid, vapors, explosive or combustible gases or atmospheric agents
(rain, sun, fog, snow).
l Avoid cross-sectional constriction in the hose or cable
l The airbrush gun must not be used if it is damaged.
the manufacturer declares,
l N o responsibility in the case of accidents or damages resulting from negligence or disregard of the instructions in
this manual
l Reject any responsibility for damage resulting from improper use of the equipment
10. guaranteeS
The statutory guarantee (new and unused goods) exists for all manufacturing and material defects. In such cases we
accept the exchange or repair of the airbrush gun.
Shipping costs and consequential damages are borne by us only insofar as we are legally obliged to do so.
We provide our services in Germany. Return costs from abroad can only be accepted insofar as we are legally obli-
ged to do so in Germany (or as far as EU law is applicable in Germany).
The warranty does not apply to:
l Material wear (e.g., gaskets)
l Unjustifi ed interventions or changes in the airbrush gun
l Damages by selffault
l Improper servicing and improper use
Moreover, we give no damage compensation for secondary damages!
English 5