Installing Slider Cradle - Martin UCGS Series Operator's Manual

Installing Slider Cradle

.75 (19)
1 (25)
Martin Engineering M3786-03/19
1 (25)
24 (610)
28.88 (734)
48 (1220)
Figure 1. Measuring for Slider Cradle
1. See Figure 1. The distance between top of belt and bottom of wear liners
must increase over length of transfer point. If necessary, modify chute
walls and/or wear liners.
2. Mark center of loading point on stringer both sides of belt.
3. Install an idler 1 in. (25 mm) before and 1 in. (25 mm) after cradle.
.375 (9)
3
Dimensions—in. (mm)
®
Martin Modular Slider Cradle