Advertisement
12
6
Set the film speed scale on the Servo EE Finder
at the film speed of the film to be used
Lift and
turn the ring around the shutter speed dial.
This
can be performed more easily while
'
pressing the
center of the dial.
• When detaching, slide the Servo EEFinder back-
wards wh ile depressing the attachment stoppers.
7
Connect the Battery Case to Servo EE Finder by
using the Cord 12V 2E. Plug the connectors
into
the Finder and the Battery Case, and then tighten
the connector of the Battery Case side by turning
its outer
ring.
8
By setting the main switch at "M", the
servo
operation pin will descend to its attachment
position.
• The Servo EE Finder will function properly only
when the servo operation pin is at its attachment
position
.
Be sure to perform the above operation
before attaching the EE
Coupler.
9
Open the cover for the servo operation pin, situ-
ated on the camera by the side of the mirror box,
insert the EE Coupler while aligning its attachment
position, and tightening
it
with the coupler attach
-
ment
screw.
10Adjust the lens speed adjustment dial by set-
ting the proper lens speed, i.e., the full opening
f/number of the lens to be used.
• The lens speed scale of the adjustment dial:
(1.2) 1.4 (1.8) 2 (2.5) 2.8 (3 .5) 4 5.6
Figures in parentheses denote values
for
white
dots.
Advertisement
