Pairing The Evolution Kit To The Samsung Smart Remote; Installing Batteries Into The Samsung Smart Remote - Samsung Evolution Kit User Manual

Pairing the Evolution Kit to the Samsung Smart Remote

Installing batteries into the Samsung Smart Remote

To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration, and then insert
the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction. Close
the rear cover as shown.
• Alkaline batteries are recommended for longer battery life.
English-14
When you turn on the Evolution Kit for the first time, the Samsung Smart Remote pairs to the
Evolution Kit automatically. If the Samsung Smart Remote does not pair to the Evolution Kit
automatically, point it at the front of the Evolution Kit, and then press and hold the buttons
labelled and as shown in the figure on the left simultaneously for 3 seconds or more.
• The Samsung Smart Remote can be paired to only one Evolution Kit.
• The Samsung Smart Remote supplied with your Evolution Kit can be paired to only an
Evolution Kit.