Cleaning And Maintenance; Cleaning The Sensors - Samsung AX60R5080WD User Manual

Cleaning and Maintenance

Cleaning the sensors

Cleaning and drying the front panel
Cleaning and drying the filters
10 English
SSEC_DLX_AX5500_EU QG_DB68-08458A-03_EN.indd 10
• If there is dust or foreign substance on a sensor, use a vacuum
cleaner to clean the sensor and its surrounding.
STEP 1 Remove the front panel.
• Use your thumbs to press on the top of the product and pull
the front panel forward with other fingers.
STEP 2 Clean and dry the front panel.
• Clean any dirt or foreign substance on the front panel with
water or a soft cloth.
• After cleaning with water, thoroughly dry the front panel
before reassembling it to the product.
STEP 3 Reassemble the front panel.
• First, insert the hook on the panel into the groove at the
bottom of the product.
Cleaning the pre-filter
• If you can see dust accumulations, remove large dust first
with a vacuum cleaner, and then rinse the filter with lukewarm
water.
‐ Cleaning interval: 2 weeks (when using the product 24
hours every day)
Drying the filters
• Keep the filters in the shade until completely dry and away
from direct sunlight.
2020/7/1 9:15:31