Select Air Bag/Stretch for massage
[Movement and part selection mode]
After Air Bag/Stretch is pressed, the
product will switch to the
movement and part selection mode.
(If there is no operation in three minutes in the movement and part
selection mode, the power supply will be disconnected automatically.)
❶
Select the movement and part for Air
Bag/Stretch massage through ▲ or ▼.
Corresponding
light of the selected
movement and part
will flicker.
❷
Press ◀or▶.
Corresponding light of the selected part will remain lit (it has
●
flickered before).
Multiple parts can be selected in a single time by repeating steps
●
❶
and ❷.
For example, after
shoulders and legs in the
Air Bag type are selected,
the corresponding lights
will be lit (the
flicker).
The Air Bag type and the Stretch type cannot be selected at the
●
same time (except in the Automatic Programs).
❸
Press
. After Stretch is selected,
the product will adjust to the
massaged part automatically (EN23).
If Stretch is selected, back warm massage and foot warm
●
massage will both be enabled.
If Stretch is selected, validate the rough shoulder position before
●
massage.
Method to cancel selected part(s)
Press ▶ to make corresponding light of a selected part flicker.
To cancel all the selected parts, just press
If Automatic Programs is selected and you want to disable the Air Bag
●
or Stretch type, make the corresponding lights of the unneeded parts
flicker and press
.
Set as you like
lights will
.
EN31
EN29