Advertisement
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grant-bio DEN-1
Summary of Contents for Grant-bio DEN-1
- Page 1 Densitometer DEN-1 Operating instructions For version V.1GW...
-
Page 2: Table Of Contents
Contents Safety ..................3 General Information ..............4 Getting started .................5 Operation of DEN-1 ..............7 Maintenance ................9 Specifications................10 Guarantee and service ............11 Version 1.03 - July 2013 DEN-1 Page 2 Operating instructions... -
Page 3: Safety
BIOLOGICAL SAFETY It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or penetrates into the equipment. DEN-1 Version 1.03 - July 2013 Page 3 Operating instructions... -
Page 4: General Information
2. General Information Densitometer DEN-1 is designed for solution turbidity measurement in the range of 0.3 - 5.0 McFarland units (100x10 - 1500x10 cells/ml). DEN-1 is capable of measuring solution turbidity in a wider range (5.0 - 15.0 McFarland units) however, it is important to be aware that in this case the standard deviation values increase. -
Page 5: Getting Started
Remove packing materials carefully and retain for future shipment or storage of the unit. Examine the unit carefully for any damage incurred during transit. The warranty does not cover in-transit damage. The DEN-1 set includes: Standard set Densitometer DEN-1 ....................1 piece D16 adapter for tubes with external diameter 16 mm ..........1 piece... - Page 6 Installation of adapter D16 An adapter D16 must be used for work with tubes which have external diameter 16 mm. Insert the adapter into the tube socket (fig.2/v ), perform calibration. Version 1.03 - July 2013 DEN-1 Page 6 Operating instructions...
-
Page 7: Operation Of Den-1
4.5. Glass and transparent plastic tubes (16 or 18 mm in external diameter) can be used for work with DEN-1 densitometer. An adapter must be used for work with tubes which are 16 mm in external diameter. Note! The unit must be calibrated each time a tube type (e.g. with different outer diameter, bottom shape or different material [transparent plastic tubes]) is changed. -
Page 8: Maintenance
Before using any decontamination or cleaning method except that recommended, check with our Service Department, or in other countries with our distributor, that the proposed method will not damage the equipment. Version 1.03 - July 2013 DEN-1 Page 8 Operating instructions... -
Page 9: Specifications
Calibration kit for glass tubes 16 mm in diameter DEN MCF 18 STDS Calibration kit for glass tubes 18 mm in diameter Grant is committed to a continuous programme of improvement, specifications may be changed without notice. DEN-1 Version 1.03 - July 2013 Operating instructions Page 9... -
Page 10: Guarantee And Service
TWO YEARS against faulty materials or workmanship. Service For service, return for repair to our Service Department in the UK or, in other countries, to our distributor. Version 1.03 - July 2013 DEN-1 Page 10 Operating instructions... - Page 11 DEN-1 Version 1.03 - July 2013 Operating instructions Page 11...
- Page 12 Grant Instruments (Cambridge) Ltd Shepreth Cambridgeshire SG8 6GB Tel: +44 (0) 1763 260811 Fax: +44 (0) 1763 262410 Email: scientificsales@grantinstruments.com www.grantinstruments.com Densitometer/DEN-1/28712/1.03...
Need help?
Do you have a question about the DEN-1 and is the answer not in the manual?
Questions and answers