Whirlpool ETl4EK Use & Care Manual page 6

Changing the light bulb.. .
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigemtor at the main power supply.
Shock and injury could occur.
1 Reach behind control console to find bulb
2 Remove bulb
3 Replace with a do-watt appliance bulb
Moving the meat pan and cover...
Removing:
The meat pan and cover can be removed for
cleanrng and moved to another shelf, If destred
Remove the meat pan first
1. Slide meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. To remove cover, lift it straight up and out
Replacing:
1. To replace cover, fit notches in cover sides over
center shelf support
2. Lower cover in place.
3. To replace pan, fit edges of pan into supports on
cover.
Adjusting the refrigerator shelves...
1 First, remove food from shelf
2 Slrde shelf straight out to stop
3 Lift front
4 Slide the rest of the way out
Replacing Shelf:
Guide Stop
Shelf Stop
1. Fit back of shelf on top of guides with wire stops
on the bottom of guides.
2. Lift front, slrde shelf in untrl it clears guide stops
4 Slide meat pan into place.
Removing crispers and crisper cover.. .
Removing Crispers:
Then the Back.
I. Slide crisper stratght out to stop
2. Lift the front.
3. Slide the rest of the
way
out
4. Replace In reverse order
Remove Cover:
1 Lift front, then lift back
2 Pull up and out
Replacing Cover:
1. Fit notches on back of cover into back nubs on
wall of refrrgerator.
2. Lower front into place.
Pull out to
stop.
ift the Front and Pull Again.
Removing the freezer shelf.. .
1 Lrft front slrghtly
2 Lift back off supports
3 Replace in reverse order
Lift the Front
Then the Back
6