Using Your Refrigerator - Whirlpool ETl4EK Use & Care Manual

Using your refrigerator
Refrigerator Control
/
Power Saving Control
light Switch
Freezer Control
Setting the controls.. .
Controls for the refrrgerator and freezer are tn the Give the refrigerator time to cool down com-
refrigerator When the refrrgerator is plugged tn for pletely before adding food. (This may take sev-
the first time.
PFPPIcFPnTnP
eral hours )
1. Set the REFRIGERA- -
TOR CONTROL to 3
2. Set the FREEZER
CONTROL to B
Changing the control settings.. .
If you need to adjust temperatures In refrigerator
or freezer, use the settings listed in the chart below
dA
QUESTIONS
CONDITION:
If Refrigerator
Section IS
TOO WARM
If Freezer
Section is
TOO WARM
'?
. ..call your
COOL
If Refrigerator
-LINE ' Section is
service
asststance
TOO COLD
telephone
If ICE Isn't
number
MADE FAST ENOUGH
(page 11)
If BOTH SECTIONS
are TOO WARM
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
juice
IS
as cold as You like and when ice cream
is firm
l
Adjust the Refrigerator Control ftrst
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, if needed.
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
[can't cycle often enough)
Controls not set correctly
for Your condrtrons
Heavy ice usage
Very cold room temperature
[can't cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
RECOMMENDED CONTROL
SETTINGS:
Refrigerator
Freezer
Refrigerator
Freezer
3
A
Refrigerator
Freezer
Refrtgerator
Freezer
Refrigerator
Freezer
Power Saving Control.. .
The Power Saving Control on the Control Con-
.<
sole operates electric heaters around the door
I. Use the CONSUMES LESS ENERGY" setting when
openings. These heaters help keep moisture from humidity is low
forming on the outside of the refrigerator
2. Use the "REDUCES EXTERIOR MOISTURE" setting
only if moisture forms on the outside of the
refrigerator.