Usfng Your Refrigerator; Setting The Control; Power Saving Control; Changing The Light Bulb - Whirlpool ETl4CC Use & Care Manual

Using Your Refrigerator
TEMPERATURE
CONTROL
OFF
.
REDUCES EXTERIOR
MOISTURE
IFI
POWER
SAVING
CONTROL
SAVES POWER
I
l
Setting the control
The Temperature Control for the refrigerator and
freezer is in the refrigerator. When the refrigerator
is plugged in for the first time:
1. Set the Temperature Control to 3.
Give the refrigerator time to cool down
completely before adding food. (This may take
several hours.)
This setting should be about right for normal
household refrigerator usage.
The control will be set about right when milk
or juice is as cold as you like and when ice cream
is firm.
Power saving control
The Power Saving Control on the Control Console
operates electric heaters around the door open-
ings. These heaters help keep moisture from form-
ing on the outside of the refrigerator.
1. Use the SAVES POWER setting when
humidity is low.
2. Use the REDUCES EXTERIOR MOISTURE
setting if moisture forms on the outside of
the refrigerator.
Changing the light bulb
Electrical Shock Hazard
Before removing the light bulb, either
unplug the refrigerator or disconnect the
electricity leading to the refrigerator at the
main power supply. Shock and injury can
occur if electricity remains connected.
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulb.
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
5