4. System Requirement And Installation; Making Cable Connections; Usb Audio Adaptor Driver Installation - Advent ADE-200A User Manual

4. System Requirement and Installation

This device must be applied on USB specification products. And user should
to confirm that PC operation supports USB function, USB 1.1 or 2.0.
• OS Support ¡GWin98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
• System recommended¡Guse Intel Pentium III ©Î AMD K6 500 CPU above
• At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and
WinXP)
• At least 50 MB hard disk space
• For good sound quality, please adjust your system's H/W acceleration and
Sample rate conversion quality to Full and Best.

Making cable Connections

1 Plug speaker cable to back of speaker unit.
2 Plug speaker cable to USB adaptor
3 Plug USB adaptor to computer USB port.
USB audio adaptor driver installation (No external driver installed)
1 Turn on PC system and connect USB Multi-media Sound Device to PC
system.
2 Computer system should detect an USB audio device and required driver
software will be installed automatically. Please wait unit system indicate
"Device ready for use".
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But this is
very rare.
Sometime, when user plug USB Personal Multi-media Device on PC system and OS
cannot auto change audio device to USB audio, please switch the audio device to
USB audio sound and audio devices properties in control panel.