Related Manuals for Duobond RL-eez
Summary of Contents for Duobond RL-eez
- Page 1 MANUAL RL-EEZ Windshield Removal DB Imagineering BV Laarakkerweg 10 NL-5061 JR Oisterwijk info@duobond.com...
- Page 2 MANUAL Windshield Removal Winch Suction cup with pulley Suction cup with fastner Handheld transmitter 12V Connection cable 2 of 9...
- Page 3 Use hand protection during work! Description of regulatory use The Duobond RL-eez system is only suitable for cutting polyurethane adhesive to cut out windscreens from vehicles. With wirelessly controlled 12V winch unit, suction cup with pulley and suction cup with fastner.
- Page 4 Customer service and repair: only by manufacturer or service workshops, nearest addresses can be found at: www.duobond.com Only use original Duobond spare parts! Order at www.duobond.com Special hazard description for the environment Do not dispose of power tools with household waste! Enter the device, accessories and packaging in an environmentally friendly way! Please observe the applicable national regulations.
- Page 5 How to use the RL-eez winch and remote control. Attach a nylon wire end to the suction cup with fastner on the inside of the window. Pierce the polyurethane adhesive from the inside to the outside and then draw the screen diagonally about twice wire length to the outside.
- Page 6 The cutting angle changes during cutting. If there is no longer any sharp angle, the suction cup with pulley must be repositioned so that the correct angle is created again. After use, store the complete RL-eez system clean and dry in the supplied case. 6 of 9...
- Page 7 Other operating instructions. * Use a cover to protect the dashboard * If the pulling tention is to high, the nylon cutting wire may tear. Slowly rewind the cutting wire in the opposite direction, check the cause of the increased resistance and start cutting again. * Reduce the resistance by spraying the nylon wire with a little water and soap when it is around the window.
- Page 8 CE Certificate DATA Sheet Glass Removal Serial no. Machine Duobond RL-eez system complete 12v 380012 EG-Konformitätserklärung. Wir erklären in alleiniger Verantwortung, dass dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: 2006/42/EG EC-Declaration of Conformity: We declare at our sole responsibility that this product is in conformity with the following standards or standardised documents: 2006/42/EG CE-Déclaration de conformité...
- Page 9 2006/42/EG Oświadczenie o zgodności z normami UE. Niniejszym oświadczamy na własną odpowiedzialność, że produkt ten spełnia następujące normy lub dokumenty normatywne: 2006/42/EG Dhr R. Schellekens 21.1.2016 Managing Director Duobond International BV Laarakkerweg 10 NL-5061 JR Oisterwijk 9 of 9...
Need help?
Do you have a question about the RL-eez and is the answer not in the manual?
Questions and answers