Invacare AVENTIA P402 Operating Instructions page 2

P402 AVENTIA, P408 MAEsTrIA, P421B FOrIA
SAFETY
- Check that the walking frame has been deli-
vered in perfect condition before you use it
- The walking frame must be fully unfolded
when used as a walking support. NB. Only
to be used as a walking support.
- NB! Do not sit on the crossbar.
- NB! Do not use the crossbar as support.
- Exercise caution when walking on sloping
surfaces.
- Do not go up or down stairs with the walking
support.
- Do not use the walking support on an esca-
lator.
- Do not exceed the maximum user weight
that is specified on the walking support's
label.
- Parts that are worn out, damaged or missing
must be changed immediately by a qualified
technician.
- Do not leave or store the walking support
outside.
- Check the stability of the walking support
at regular intervals and when necessary that
nuts and bolts are tight and that the ferrules
are in good condition.
- Exercise great care when using the walking
support on wet or slippery surfaces.
ADJUSTING THE HEIGHT OF THE
WALKING SUPPORT
Press in the sprung locking pin until the leg is
released. Set the leg at the required length and
check that the locking pin is projecting out into the
tube. All legs should have the same length.
2
Do not sit on the
crossbar because of
the tipping risk!!
P402 AVENTIA, P408 MAEsTrIA, P421B FOrIA
BEFORE USE
All packaging should be removed before
using the walking support for the first
time.
UNFOLDING
Unfold the side frames until a distinct
clicking sound is heard. Check that it is
not possible to fold the side frames in
before using the walking support.
FOLDING
Press the locking knob in the middle of
the upper cross bar and fold in the side
frames.
NB!
Do not engage the locking knob
unless you intend to fold the walking
frame.
NB!
NB! Be aware of the risk of crushing
between the parts of the frame.
EN
3