Point Hitch - Land Pride RCR2684 Operator's Manual

Section 4: Options
Hitch/Wheel Options
There are two Hitch/wheel combinations to meet your
specific requirements.
Part Number & Description
326-116A 3-Point Quick-Hitch with Single Tail Wheel
326-117A 3-Point Quick-Hitch with Dual Tail Wheels

3-Point Hitch

Refer to Figure 4-4:
The standard 3-point Hitch shown in Figure 4-4 is
included with the single leveling wheel option and dual
leveling wheel option.
Single Leveling Wheel
Refer to Figure 4-5:
The single leveling, 15" laminated tire is an economical
solution to mowing when terrain is fairly level. Rear deck
height is adjusted by manually raising and lowering the
wheel in the rear support bracket. The cutter's front is
leveled with the tractor's three point hitch. See
"Single Tailwheel Assembly" on page 14 for proper
installation and detailed adjustment information.
Dual Leveling Wheels
Refer to Figure 4-6:
The dual leveling, 15" laminated tires is a tougher
arrangement designed to distribute cutter weight over a
wider area when mowing rough terrain. Rear deck height
is adjusted by manually raising and lowering wheels in
the rear support brackets. The cutter front is leveled with
the tractor's three point hitch. See "Dual Tailwheel
Assembly" on page 14 for proper installation and
detailed adjustment information.
Check Chain Option
Refer to Figure 4-7:
Check Chains are used to control cutting height and
allows the cutter to be lowered to the same preset cutting
height effortlessly.
NOTE: For additional safety in transport, raise
cutter as high as possible, and shorten check chains
to prevent inadvertent falling in transport.
See "Check Chain Installation (Optional)" on page 13
for proper installation.
Part Number & Description
312-071A Check Chain Assembly
12/4/18
Table of Contents
26637
3-Point Hitch
Figure 4-4
Single Leveling Wheel
Figure 4-5
Dual Leveling Wheels
Figure 4-6
Optional Check Chain Assembly
Figure 4-7
RCR2684 Rotary Cutter 312-785M
26634
20938
20939
23