Area Of Application; Interfaces And Connection Options - Gira 2914 Series Installation, Start-Up, Operation

Emergency set
Table of Contents

Advertisement

Introduction
1.3

Area of application

The Gira emergency set is used to signal emergency situations and for alarming personnel.
Signalling of an emergency situation is via a red signal light in the call module as well as
acoustically via a buzzer (activated optionally) in the call module.
An additional call button and duty room unit can be optionally connected to the emergency
set as a reception unit via which a call can be signalled visually and acoustically, e.g. in
another room.
The Gira emergency set is suited to all areas of application in which the installation of a call
system according to DIN VDE 0834 is not expressly required, but where use of a call system
is still expedient and is also thoroughly recommended due to high risk factors. Thus
installation is possible in locations such as public outdoor facilities (e.g. toilet rooms in public
baths), in public buildings such as administrative authorities, museums, department stores
and also at places of work with especially high risk potential.
The range of application therefore covers for example all rooms in which persons who are
alone (without visual or acoustic contact to their surroundings) may become subject to an
emergency situation.
Gira assumes neither legal responsibility nor provides a guarantee for errors and damage of
any kind as a result of improper use and/or unprofessional installation of the emergency set.
1.4

Interfaces and connection options

The emergency set features the following interfaces and connection options:
Relay contact (zero-voltage connection) in the call module, for connection of an
external device (e.g. Gira TeleCoppler, order number 0363 00). See also "Call
module" on page 23.
Consult the operating instructions of the external device!
8
11.2009/V 1.2

Advertisement

Table of Contents
loading

Table of Contents