Scope Of Delivery - Gira 2914 Series Installation, Start-Up, Operation

1.2

Scope of delivery

The following components are contained in the delivery scope of the emergency set
(order no. 2914 ..):
Call module, order number 2916 00 (abbreviation: RM)
Device view
Contains both the electronics
for the emergency set as well
as the signal light.
Function: call display.
Red signal light in the call module as flashing light with either pulsing buzzer tone see
"2.8 The jumpers of the devices in the emergency set" on page 22. Zero-voltage relay
contact for connecting for example a telephone dialler (not included in scope of delivery).
Signal light with continuous light and continuous buzzer tone signal a wire fracture. See
also "Call module" on page 23.
Installation in flush-mounted box according to DIN 49073. Recommendation: deep box.
Pull-cord button, order number 2912 .. (abbreviation: ZT)
Device view
Connection to: call module
Function: call triggering.
Pull cord with red handle on pull-cord button. Red reassurance light lights up in the
housing of the pull-cord button. Red signal light in the call module lights up. Also buzzer
may tone.
Installation in flush-mounted box according to DIN 49073.
11.2009/V 1.2
Connection assignment
PCB
Back
Connection assignment
PCB
Back
Introduction
Legend
+ 24 V Power supply
GND Earth
M Signal line to duty room
KW Base relay contact
KR Rest relay contact
KA Operating relay contact
+ 24 V_out Voltage (protected)
GND Earth (protected)
RT Call button
BL Reassurance light
AT Switch-off button
Legend
RLWC Call light WC call
RTWC\ Call button WC call (Out)
RTWC Call button WC call (In)
+ 24 V Power supply
5