Handling The Torch Stand; Information About Recycling And Disposal - Parkside MAGNETIC TORCH STAND PBHM 16 A1 Operation And Safety Notes

z Handling the torch stand
Attach the stand
to a stable metal surface (e.g. welding table).
The plasma torch can now be stored as shown in
figure A (upper storage position
the magnetic foot
other electrical devices. Make sure that you do not
touch the hot plasma torch by accident.
RISK OF BURNS!
Note
The side storage position
storage area for plasma burners.
The side storage position
storage area for WIG burners.
z Cleaning
Clean the product with a soft moistened cloth.
Do not use any aggressive or abrasive detergents.
z Storage
Keep the device in a dry location and out of the
reach of children.
z Information about recycling and
disposal
Handling... / Cleaning / Storage / ...
2 using the magnetic foot
1 to the plasma cutter itself or
3 ). Never attach
4 is not intended as a
4 is only intended as a
GB/IE
1
19