Intended Use; Package Contents; Parts Description - Parkside MAGNETIC TORCH STAND PBHM 16 A1 Operation And Safety Notes

z Intended use
The torch stand with PBHM 16 A1 magnet is
designed for use with PPS 40 A1 and PPS 40 B2
plasma cutters from Parkside. The torch stand can
be used to hold the torch of your plasma cutter
safely during short work breaks.
The side storage position
storage area for plasma burners.
The side storage position
storage area for WIG burners.
z Package contents
1 Magnetic Torch Stand PBHM 16 A1
1 set of operating instructions
z Parts description
PLEASE NOTE!
f After unpacking the product, please
check that all of the package contents
are present and that the accessory
is in perfect condition. Do not use the
accessory if it is defective.
Magnetic foot
1
2 Torch stand
3 Top storage position
4 Side storage position
Intended use / Package contents / ...
4 is not intended as a
is only intended as a
4
GB/IE 17