Advertisement
Removing
the freezer shelves...
Lilt the Front
Then the Back
Removing
the freezer basket.. .
For proper arr movement,
keep the freezer basket
in place when the refrigerator
is operating
To remove
the basket:
1, Slide out to the stops.
2. Lift the front to clear the stops.
3. Slide out the rest of the way.
To replace
the basket:
1, Place baskets on the slides.
2. Make sure the wire stops clear the front of the slides
3. Slide basket in.
Ice cube trays.. .
To remove
ice:
1. Hold tray at both ends.
2. Slightly twist.
Changing
the light bulbs.. .
Before removing
the light shield for cleaning
or for
replacing
the bulb,
unplug
the refrigerator.
Use
opplionce
bulbs on/y
Pull Off the Dial;
Pull Out at the Bottom
Removing
the base grille.. .
1, Open the doors.
2. Pull grille outwards as shown
3. Do not remove
Tech sheet fastened behind grille
I, Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order.
If cubes are not used, they may shrink. The moving
cold arr starts a slow evaporation.
The longer cubes
are stored, the smaller they get.
light
blubs
behind
refrigemtor
and freezer
control
consoles:
1. Pull control knob straight off.
2. Pull bottom of control panel straight out.
3. Lift top of panel off supports.
4. Replace
with a 40-watt appliance
bulb.
5. Replace
panel in reverse order.
light
bulb behind
crisper
and meat
pan:
1, Remove crisper, meat pan and covers.
2. Bulb is on the back wall of refrigerator
3. Replace
with a 40-watt appliance
bulb.
4. Replace
covers, meat pan and crisper.
To replace:
I, Line up grille support tabs with metal clips.
2. Push firmly to snap Into place.
3 Close the doors.
Advertisement
