Arpology
A 4‐voice arpeggiating synth, with an auto‐improvisation feature.
How to use:
1) Press a piano key and Arpolgy will play a 4-voice appegiating
pattern based on what note you are pressing.
2) To shift the keyboard up an octave tap the right button.
To shift the keyboard down an octave tap the left button.
3) Arpology uses two separate User Interface (U/I) "frames."
frame determines which parameters are controlled by the onboard
pots.
The two U/I frames for Arpology are:
1) The Envelope Frame (BLUE LED is on)
2) The Arpeggiator Frame (RED LED is on)
4) To switch between U/I frames, press the left or right buttons.
Pressing the right button selects the Envelope Frame.
Pressing the left
5) To activate the automatic improvisor double-tap the left button.
Arpology now "plays itself."
begin flashing, indicating that the auto-improvisor is on.
the auto-improvisor is on, Arpology will not respond to key
presses.
button again.
Top
Pot controls envelope attack
Bottom Pot controls envelope decay/sustain.
Top
Pot selects arpeggiation pattern.
Bottom Pot controls arpeggiation rate.
button selects the Arpeggiator Frame.
To turn off the auto-improviser double-tap the left
The LED for the current frame will
1
A U/I
While
Need help?
Do you have a question about the Arpology and is the answer not in the manual?
Questions and answers