BMW R 1250 GS Adventure HP Supplementary Rider's Manual page 29

Loosen the nut 1 and slide the
clamp 2 towards the rear.
Remove the screw 1 and the
washer 2.
Remove the rear silencer 3
including chafing protection
washer 4 and clamp 5.
Installing the rear silencer
Thinly lubricate the inside of
the clamp 1 and slide it onto
the rear silencer.
Thinly coat the inner diameter
of the rear silencer 2 and slide
it on up to the limit position.
Lubricant
Copper paste
Install the screw 3 including
washer 4 and chafing protec-
tion washer 5.
Silencer to rear frame
19 Nm
Position the clamp 1 with the
recess in the lug arrow.
Tighten nut 2.
Clamp to silencer and
exhaust manifold
22 Nm
6
27
z