Advertisement
External Connections
Element-
interchangeable
Thermistor
Input power supply: 100 to 240 VAC
* Control output Heating load: Terminals 8 and 12
Cooling load: Terminals 4 and 12
Be careful of the cooling load contacts, because they will be electrically
charged even when the E5L input power supply is OFF.
Note: For thermistor wiring, separate the input power supply and load lines as much as possible to avoid the influence of inductive noise.
Nomenclature
E5L-A@
Operation indicator
E5L-C@
Operation indicator
Set value indicator
Protection indicator
Dimensions
Thermostats
E5L-A@
E5L-C@
E5L-A@
Control output
250 VAC, 10 A
Temperature dial
Mode Key
Down Key
Up Key
35
45
35
45
*
Element-
interchangeable
Thermistor
Input power supply: 100 to 240 VAC
* Control outputs: Terminals 8 and 12
Use the keys on the front panel to set direct/reverse operation.
Operation Indicator
Operation
indicator
Lit red.
Hysteresis
Not lit.
adjuster (DIFF.)
Operation Indicator: ON
Operation
Process value
indicator
and set value
display
Lit
Not lit
Set Value Indicator: SV
Lit when the set value is displayed.
Setting Protection Indicator:
Lit when setting protection is set.
(4.6)
E5L-C@
Control output
250 VAC, 10 A
Output status
Heating load
Cooling load
ON
OFF
Output status
Reverse
Direct operation
operation
ON
OFF
64
6.4
75.0
64
6.4
70.4
E5L
*
OFF
ON
ON
OFF
(Unit: mm)
3
Advertisement
