Advertisement
Figure 7.
Figure 9.
Figure 11. 77" x 77" LitePanel Kit
For detailed specifications,
product tutorial videos
Figure 8.
Figure 10. 39" x 39" LitePanel/
LiteReach Kit
and more, please visit www.photoflex.com
Alternatively, the hardware can be attached so that the track plate is
facing out from the edge of the frame. In this configuration, a second
fabric can be attached on the opposite side for a quick change of
reflector surfaces or for double diffusion. Figure 7
Step 5 With either one or two upper and lower components attached
to the frame. Slide the swivel stand mount onto the swivel track on the
lower plate and tighten the set screw knob. Figures 8-9
Tip: When using the LitePanels extended like a boom as shown in figure
10, put the swivel handle on your left side when attaching it to the
mounting track. In this way, gravity works with you allowing the weight
of the LitePanel to further tighten the swivel rather than loosen it.
With the Hardware securely attached, it is now ready to be placed on a
Photoflex LiteStand or the LiteReach Plus hand held extension. Figures 10-12
Figure 12. 39" x 39" PVC LitePanel Kit
Customer Support (831) 786-1370
E-mail: sales@photoflex.com
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. LiteReach
trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S.
and other countries.
PHOTOFLEX
WARRANTY
®
• Warranties only cover manufacturer's defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
®
, Photoflex
®
and the Photoflex logo are
Advertisement
