Photoflex LP-SWVLHRDWR Instructions

LitePanel Mounting Hardware Instructions • Item: 870571 (LP-SWVLHRDWR)
Upper Cover
Lower Track Mount
Swivel Stand
Mount
Figure 1.
Figure 3.
Figure 5.
For detailed specifications, product tutorial videos
Socket Head Screws
Allen Wrench
Figure 2.
Figure 4.
Figure 6.
and more, please visit www.photoflex.com
LitePanel Mounting Hardware
The LitePanel Swivel Mount Hardware is designed to interface the
LitePanel line of frames with the LiteReach
or the appropriate Photoflex LiteStand.
Before assembly check to make sure you have all of the following parts
• 1ea. Swivel Stand Mount
• 1ea. Upper Cover
• 1ea. Lower track mount
• 2ea. 6mm / .75 x 10mm Socket head screws
• 1ea. 3/16"/5mm allen wrench
Attaching the LitePanel Mounting Hardware to LitePanel Frames:
Note: You should have the assembled LitePanel frame lying on a flat
surface
Step 1 Disassemble the upper cover from the lower track mount
using the allen wrench. Figure 1
Note: There are two mounting options for the LitePanel Mounting
Hardware depending on your application:
A. If you are using the hardware with the LiteReach Plus extension
pole then you will only use one LitePanel hardware set. The
orientation of the lower track plate will have the swivel track in a 90
degree position in relation to the frame tube. Figure 2
B. If you are using the LitePanel hardware with two light stands to
mount the LitePanel overhead, two LitePanel hardware sets will be
required. The orientation of the lower track plate will have the swivel
track in a parallel position in relation to the frame tube. Figure 3
Note: For most applications it is recommended that you attach the
hardware in the middle of the width of the frame for the best balance
and stability.
Step 2 Place the track plate under the frame tube, making sure the
swivel track is in the desired position. Figure 4
Step 3 Place the Top Cover over the frame tube aligning the holes
with the lower Track plate for the attachment screws. Figure 5
Step 4 Attach the top cover to the lower track plate by securely
tightening both socket screws using the Allen wrench. Figure 6
Plus handheld extension
®
Rev 09/2016