Advertisement
Before Assembly,
Please Read this Leaflet
Tools Required
Components
A
Top Panel
B
Adjustable Legs
C
Underframe
D
Frame Feet
E
Adjustable Foot
F
Controller
G
Cable Port
Aerial
Height Adjustable
2 Person Assembly
Assembly Instructions
4mm Allen Key
or Hex Screwdriver
B
C
D
Fittings Kit
x1
x2
x1
x2
x4
x1
Bolt
x2
x 30
Pozi Screwdriver
A
E
F
C
H
I
J
M6
6x5/8
Cable
Screw
Clips
x 2
x 4
G
H-K
K
Mounting
Plate
x 1
Advertisement
Table of Contents
Related Manuals for Genesys Aerial Height Adjustable
Summary of Contents for Genesys Aerial Height Adjustable
- Page 1 Aerial Height Adjustable 2 Person Assembly Before Assembly, Please Read this Leaflet Assembly Instructions Tools Required 4mm Allen Key Pozi Screwdriver or Hex Screwdriver Components Fittings Kit Top Panel Adjustable Legs Underframe Frame Feet Adjustable Foot Controller 6x5/8 Cable Mounting Bolt Screw Clips...
- Page 2 1. Lay the Top Panel (A) on a flat surface with the holes 2. Place the Underframe (C) over the Adjustable Legs (B). exposed. Position the Adjustable Legs (B) into position as Using Allen Key, screw 22x M6 Bolts (H) into the frame and shown above.
- Page 3 4. Screw 2x 6x5/8 Screws (I) through the Mounting Plate (K) to 4a. Attach the Controller (F) to the Mounting Plate (K). the underside of the Top Panel (A) making sure the flat edge is closest to the front of the desk. 5.
Need help?
Do you have a question about the Aerial Height Adjustable and is the answer not in the manual?
Questions and answers