Connecting To Inverter; Connecting Pv Modules - Generac Power Systems PV Link S2502 Installation Manual

CAUTION
Equipment damage. Connect the PV Link output to a REbus-
compatible device (± 190 VDC nominal regulated DC bus)
only. Connecting to conventional PV inverters or any other
device could cuase equipment damage.
Figure 5-3
Figure 5-3. Connecting PV Link Optimizer
•
•
•
•
•
•
•
•
Equipment damage. Never leave the PV Link MC4 connectors
open and exposed to the atmosphere overnight or during
rain. Unwired connectors should remain plugged together as
originally packaged. Failure to do so could cause equipment
damage.
(000659)
Equipment damage. Never connect PV Link to any other
power source. The optimizer is designed to work with series
connected PV modules only. Connecting the optimizer to any
other power source could cause equipment damage.
CAUTION
(000657)
CAUTION
(000661)
Component Locations
Component Locations