Of Four-Terminal Networks; Etc - BRUEL & KJAER 1022 Instructions And Applications

Applications
The field for use of the Beat Frequency Oscillator Type 1022 is so extensive
that only a few of the possible applications are illustrated in the following
pages, these being classified into there sections, showing the instrument being
used as a power source for:-
(A) Electronic Measurements
(B) Acoustical Measurements
(C)
Mechanical Measurements.
GROUP A. ELECTRONIC MEASUREMENTS
Measurement of Frequency Response of Four-Terminal Networks.
The object to be tested, e.g. a filter, transmission line, transformer etc. is fed
from the Beat Frequency Oscillator Type 1022 output. Then point-by-point
D D D D D 0 D D D D D D 0 D D
llriiol.
KJ-
Fig. 3.1. Measurement of frequency response of four-terminal A.F. network.
22