Advertisement
Quick Links
User Manual
PoE Injector
AVN-PI-IJT30G
www.aivonet.com
Features
•
Power over Ethernet Injector for 10/100/1000BaseT
•
Full IEEE802.3at compliant
•
Automatically detects and protects PoE equipment from being damaged by
incorrect installation
•
Internal AC/DC converter no need for external power brick
•
Overload and short circuit protection
•
Mixes Ethernet and power into RJ-45 port
•
Remote power feeding
•
Delivers power up to 100 meters
•
Light weight and compact size
•
Wall-mountable design
•
Easy Plug-and-Play installation
•
Power over Ethernet output power of 52V@0.6A
Hardware Discription
1
1) AC Power Input Connector
The connector shown in 1 , connects the AC power source to the PoE Injector.
2) Data IN
The power shown in 2 , is an RJ-45 Ethernet connector where data is received and
transmitted through the PoE Injector
3) PoE OUT
The port, shown in 3 , is an RJ-45 Ethernet connector where data is recieved and
transmitted through the PoE Injector and provides PoE power along with the Ethernet
data to a PoE device.
www.aivonet.com
DataIN
PortOUT
4
PWR
5
PoE
2
3
Advertisement
Related Manuals for AIVO NETWORKS AVN-PI-IJT30G
Summary of Contents for AIVO NETWORKS AVN-PI-IJT30G
- Page 1 User Manual • Power over Ethernet output power of 52V@0.6A Hardware Discription PoE Injector AVN-PI-IJT30G DataIN PortOUT 1) AC Power Input Connector The connector shown in 1 , connects the AC power source to the PoE Injector. 2) Data IN...
- Page 2 4) PWR LED • Verify that you are using a standard category 5/5e/6, straight-wired cable, with four pairs. This LED shown in 4 , indicates the AC power is being provided to the unit or not. • If an external power splitter is in use, replace it with a known-good splitter. 5) PoE LED •...
Need help?
Do you have a question about the AVN-PI-IJT30G and is the answer not in the manual?
Questions and answers