Advertisement
Available languages
Available languages
WARNINGS:
*
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES
(15CM).
*
The toddler bed or day bed is not intended for children under 15 months of age or over 50 lbs.
(22.7 kgs).
STEP 1:
Detach the front panel (D) from side panels (B & C) with Allen key (5).
STEP 2:
If mattress support (F) is not in the lowest position, unscrew mattress support bolts (1)
and spring washers (3) from left & right side panels (B & C) and move to the lowest
position.
STEP 3:
Attach bottom rail (E) to the side panels (B & C) using wood dowels (7), bolts (6) and
spring washers (4). Use Allen key (5) to tighten all bolts.
Ensure all bolts are tightly secured.
STEP 4:
DAY BED ASSEMBLY: STARTING FROM SCRATCH
STEP 1:
Follow steps 1 to 3 of the crib assembly instruction.
STEP 2:
Follow steps 2 to 4 for the day bed assembly instruction located above (starting from
crib).
5-IN-1 CONVERTIBLE CRIB
DAY BED ASSEMBLY: STARTING FROM CRIB
DA1805B5
5
7
6
4
Advertisement
