Advertisement
5. Press any key. The BOSSP80 Configuration Utility Main menu opens and you are prompted for a
password. Type the default password (admin) and press Enter to continue. The main menu options are
displayed.
4. Select the System Group submenu under the
BOSSP80 Configuration to set up the IP
Address,Gateway Address, Network Mask and the
System Date/Time. This IP address will be used
while accessing the web interface to configure the
BOSSP80 parameters.
5. After connecting to WAN, open a browser from a PC in the network and use the BOSSP80 IP address
specified through the console menu to open the web interface for system configuration.
BOSSP80 Quick Installation Guide
- 2 -
Advertisement
