Advertisement
WWW.PEAKWORKS.CA
ASSEMBLY
Step 1:
Stand the tripod into an upright position on a flat and level
surface. (FIGURE 1)
Step 2:
Open the legs and insert the locking pins at the head of the
tripod. (FIGURE 2)
Step 3:
Extend the legs as far as is required and insert the locking pins
similar to the locking pins in the head of the tripod. (FIGURE 3)
(FIGURE 2)
Step 4
Tighten the safety chain using the clip. (FIGURE 4 & 5)
(FIGURE 4)
Step 5
Attach the mounting bracket
for the SRL-33303-50 on the
upper portion of the tripod leg
that has the pulley on top.
Ensure that the bracket is
oriented as shown in the
picture. Secure tightly all four
nylok nuts onto the bolts.
(FIGURE 6 & 7)
TM
INC
(FIGURE 6)
(FIGURE 3)
(FIGURE 5)
4
(FIGURE 1)
(FIGURE 7 )
Advertisement
