Starting Playback Of The Second Track; Mixing In The Audio Signal - Native Instruments TRAKTOR KONTROL S3 Manual

The tempo of the track in Deck B is now synced to the running track, indicated by the equal
tempo value in the software's Deck Header. The SYNC button lights up on Deck B.

5.1.6. Starting Playback of the Second Track

When the track in Deck A is almost over you can start the playback of the next track:
• Press the Play/Pause button on Deck B to start playback.
The waveform starts moving and the Channel Volume Meter LEDs in Mixer channel B illumi-
nate. The tracks in Deck A and Deck B play in sync.

5.1.7. Mixing in the Audio Signal

You can now mix the audio signal of Mixer channel B into the Master signal:
1. Move the crossfader slowly towards center position and hold for a moment.
The audio signal of the track in Mixer channel B fades into the Master signal.
2. While the track in Deck A reaches its end, slowly move the crossfader towards the right-most
position.
19
Tutorials